free web stats
MEMOLUB Automatic Lubricators :: Power Lube Industrial, LLC :: MEMOLUB® ONE Single-Point Lubricator

MEMOLUB® ONE Single-Point Lubricator


  The NEW reliable, simple & efficient single-point lubricator from MEMOLUB®

The ONE that simplifies lubrication

 Low cost replacement cartridges


Simple programming

Download the Technical Data Sheet



 The MEMOLUB® ONE LPS (Low Pressure System) was developed as a very economical single-point lubricator that is particularly suited for applications that require a limited quantity of lubricant over a 1, 3, 6 or 12 month period of time, such as electric motors, conveyors, fans, pumps, etc..

If your application requires higher output pressure, external power control or you want to lubricate multiple lube points with one unit, check our full featured MEMOLUB® HPS lubricators.  Click here



 How to program your MEMOLUB® ONE

The MEMOLUB® ONE is easy to program.  Just install the appropriate colored MEMO fitting with adapter on your bearing that meets your daily lubricant output rate, and screw on the MEMOLUB® ONE.  That's all there is to it.  No more dip switches to worry about and you can always see the time setting of your lubricator at a glance. 



Cartridge Capacity:240 cc (approx. 1/2 pound)
Compatible lubricants:Oils or Grease (to NLGI #2)*
Connection Thread:1/4 R Male (1/4"NPTM adapter included)
Max operating pressure:140psi (10 bar)
Temperature exposure range:-13°F (-25°C) to 122°F (50°C)
Min. working temperature:5°F (-15°C)
Output timing settings:1, 3, 6 or 12 months
Power Supply:4.5Vdc Alkaline battery pack 
Remote Installation:Up to 6 feet (2 meters)
Warranty:3 Years
* Maximum lube line length is dependent on ambient 
temperature, grease type and application back pressure.